Vendor: ItalWax

ItalWax FLEX liquid wax in a can ALGAE 800ml

8032835174023

* Please note that the color of the product may slightly differ from the original due to display settings.
€11,13 EUR
Taxes included. Shipping calculated at checkout.
In stock
Warranty

This product includes a 1-year limited warranty against defects in materials and workmanship.

GPSR

Filo Bianco S.R.L. Adrese: Via Monte Bianco, 17, 20833 Paìna MB, Itālija, info@italwax.it

 
 
 
Description
Flex Waxes — an excellent combination of synthetic and natural resins with the addition of innovative components.
The waxes possess special plasticity, applying to large surfaces in a very thin and even layer using a spatula (or roller).

Upon hardening, the waxes form a thin film that grips all hairs (especially when using the spatula technique), ensuring strong adhesion to the depilation strip. 100% hair removal from the first attempt without breakage.

Do not leave stickiness on the skin.

Suitable for hair of any stiffness.

Contraindications: acute and chronic skin diseases, varicose veins in the depilation area.
Rules for using warm wax: Cartridge method:
• Heat the wax in an electric heater to t +40 °C.
• Treat the skin in the depilation area with lotion or foam before depilation.
• Without removing the cartridge from the heater, roll the heated wax cartridge over a depilation strip, making sure the wax is sufficiently heated.
• Apply the wax to the treated skin area in the direction of hair growth.
• Apply the depilation strip, ensuring the end of the strip is in a wax-free area.
• Press the strip firmly to the skin.
• Grasp the free end of the strip, and with a sharp motion, remove the strip against the direction of hair growth, parallel to the skin.
• Repeat the procedure on the next section. Do not apply wax to the same area more than twice.
• At the end of the procedure, be sure to remove any sticky residue and wax using an after-depilation lotion.
Rules for using warm wax: Spatula method:
• Heat the wax in an electric heater to t + 42°С.
• Treat the skin in the depilation area with lotion or foam before depilation.
• Apply a small amount of talc to the skin surface.
• Stirring the wax periodically, monitor the consistency; wax ready for use should not be liquid.
• Take the necessary amount of wax with a spatula.
• Remove excess wax from the spatula. Caution: wax can drip from the spatula!
• To avoid getting wax on yourself, keep the wax heater near the couch. To carry the wax on the spatula to the depilation area without staining surfaces, hold a depilation strip under the spatula.
• Apply the wax to the treated skin area in the direction of hair growth.
• Quickly spread the wax over the depilation area with the edge of the spatula, covering a large surface with a thin layer.
• For wax removal rules, see the cartridge method: points 5-9.
Common mistakes when depilating with warm waxes:
• incorrect wax application (against hair growth) and incorrect strip removal (along hair growth);
• tearing off the strip perpendicular to the skin — this leads to hematoma formation;
• repeatedly applying wax to the same area leads to damage to the upper layer of the epidermis.