Vendor: ItalWax

ItalWax FLEX liquid wax in a can WINE 800ml

8032835174047

* Please note that the color of the product may slightly differ from the original due to display settings.
€11,13 EUR
Taxes included. Shipping calculated at checkout.
In stock
Warranty

This product includes a 1-year limited warranty against defects in materials and workmanship.

GPSR

Filo Bianco S.R.L. Adrese: Via Monte Bianco, 17, 20833 Paìna MB, Itālija, info@italwax.it

 
 
 
Description
Flex Waxes — an excellent combination of synthetic and natural resins with the addition of innovative components.
The waxes have special plasticity, are applied to large surfaces in a very thin and even layer using a spatula (or roller).

Upon solidification, the waxes form a thin film that grips all hairs (especially when using the spatula technique), and ensures strong adhesion to the depilation strip. 100% hair removal from the first attempt without breakage.

Do not leave stickiness on the skin.

Suitable for hair of any coarseness.

Contraindications: acute and chronic skin diseases, varicose veins in the depilation area.
Rules for using warm wax: Cartridge method:
• Heat the wax in an electric heater to t +40 °C.
• Prepare the skin in the depilation area with lotion or foam before depilation.
• Without removing the cartridge from the heater, roll the heated wax cartridge over a depilation strip to ensure the wax is sufficiently heated.
• Apply wax to the prepared skin area in the direction of hair growth.
• Apply a depilation strip, ensuring the end of the strip is in a wax-free area.
• Press the strip firmly against the skin.
• Grasp the free end of the strip and remove it with a sharp motion against the direction of hair growth, parallel to the skin.
• Repeat the procedure on the next section. Do not apply wax to the same area more than twice.
• After the procedure, be sure to remove any sticky residue and wax using post-depilation lotion.
Rules for using warm wax: Spatula method:
• Heat the wax in an electric heater to t +42 °C.
• Prepare the skin in the depilation area with lotion or foam before depilation.
• Apply a small amount of talc to the skin surface.
• Stir the wax periodically and monitor its consistency; wax ready for use should not be liquid.
• Take the required amount of wax with a spatula.
• Remove excess wax from the spatula. Caution, wax may drip from the spatula!
• To avoid getting wax on yourself, keep the wax heater next to the couch. To carry the wax on the spatula to the depilation area without staining surfaces, hold a depilation strip under the spatula.
• Apply wax to the prepared skin area in the direction of hair growth.
• Quickly spread the wax over the depilation area with the edge of the spatula, covering a large surface with a thin layer.
• For wax removal rules, see the cartridge method: points 5-9.
Common mistakes when using warm waxes for depilation:
• incorrect wax application (against hair growth) and incorrect strip removal (in the direction of hair growth);
• tearing the strip perpendicular to the skin — this leads to hematoma formation;
• repeated application of wax to the same spot leads to damage to the upper layer of the epidermis.